首页 华创产品电子灌封胶正文

808AB-D导热胶,环氧灌封胶 导热电子灌封胶密封胶 防水绝缘灌封胶 电子电器

    808AB-D是双剂型环氧树脂导热绝缘密封材料,广泛应用于电子零组件、电子变压器、充电桩、滤清器、负离子发生器、电容、电源模块、LED模组、线路元件、水族水泵、电力电器部件、汽车零部件、机电五金、光电灯饰等的绝缘灌注、粘接、防潮封填等;混合后黏度低、流动性强且具有适当的可操作时间;固化物导热性高、收缩性低、表面光亮、坚硬、附着力及密封性强,耐化学品特性优良,具有优良的电气特性与物性。
 固化前参数:
                           主剂808A-D 
外      观              黑、灰等色液体 
比      重              1.70±0.05 
粘度(25)        7000-10000cps 

                           固化剂808B-D
外      观              褐色液体
比      重              1.05±0.05
粘度(25)         70-150cps

混合比例:     A :B = 5 : 1 (重量比)
可使用时间:  
    主剂和固化剂混合后的可使用时间,是依混合总量和操作的温度而定。通常100克的混合胶在25℃时可使用时间为40-60分钟;因此,应根据实际使用情况合理调配胶水以免浪费。
固化条件:
     1、常温下一般只需要8-10小时完全固化,2-4小时初步固化;
     2、此外本司工程部还可根据客户需求调整固化时间。
固化物特性
       耐电压         Kv/mm        16-18            
       耐温             ℃                80-100
       硬度             shore  D      80-85            
       绝缘电阻      Ω-cm           2.5×1014
       导热率        W/M.°C      0.6-0.8

灌封变压器.jpg

808ab-d is a double dosage Epoxy resin heat conduction and insulation sealing material, which is widely used in the insulation pouring, bonding and moisture-proof sealing of electronic components, electronic transformers, charging piles, filters, anion generators, capacitors, power modules, LED modules, circuit components, aquarium water pumps, power and electrical components, automobile components, mechanical and electrical hardware, photoelectric lighting, etc.; viscosity after mixing Low, strong fluidity and proper operation time; high thermal conductivity, low shrinkage, bright and hard surface, strong adhesion and sealing, excellent chemical resistance, excellent electrical and physical properties.

Parameters before curing:

Main agent 808a-d

Appearance black, gray and other color liquid

Specific gravity 1.70 ± 0.05

Viscosity (25) 7000-10000cps

Curing agent 808b-d

Exterior brown liquid

Specific gravity 1.05 ± 0.05

Viscosity (25) 70-150cps

Mixing ratio: A: B = 5: 1 (weight ratio)

Available time:

The usable time of main agent and curing agent after mixing depends on the total amount of mixing and the temperature of operation. Generally, 100g of mixed glue can be used for 40-60min at 25 ℃; therefore, the glue should be mixed reasonably according to the actual use to avoid waste.

Curing conditions:

1. Generally, it only needs 8-10 hours to cure completely and 2-4 hours to cure initially at room temperature;

2. In addition, the Engineering Department of our company can also adjust the curing time according to the needs of customers.

Curing properties

Withstand voltage kV / mm 16-18

Temperature resistance 80-100

Hardness Shore D 80-85

Insulation resistance Ω - cm 2.5 × 1014

Thermal conductivity w / m. ° C 0.6-0.8

东莞市华创电子材料有限公司/东莞市华创绝缘材料有限公司/昆山市华创电子材料有限公司

专业的胶粘剂研发生产企业!始于1999年,因为专业,相信我们会做得更好!
环氧树脂胶,电子灌封胶,结构胶,单组份环氧树脂胶,环氧AB胶,弹性单组份环氧胶,密封胶,中柱胶,光电胶,防水胶,UV胶,无影胶,导电/导磁/耐高温/阻燃环氧胶,胶粘剂定制,快干胶,水晶胶,邦定胶,电子胶水,红胶,黑胶,白胶,磁芯胶,SMT红胶,底填胶,低温快固化环氧,包封胶,胶粘剂,胶黏剂,UL胶水;联络人:王先生 电话:13712306987 (微信号同)E-mail:huacxc@163.com 或 hc@huacxc.com 网址:http://www.hcglue.com 。

本文链接:https://hcglue.com/?id=104

发表评论

评论列表(0人评论 , 2066人围观)
☹还没有评论,来说两句吧...

环氧树脂胶|UV胶|结构胶|单组份环氧胶水|灌封胶|AB胶|导电胶|导热胶|高温胶|水晶胶-东莞华创材料

https://hcglue.com/

| 始于1999年,因为专业,相信我们会做得更好!

Powered By 东莞市华创电子材料有限公司

扫一扫微信二维码

产品咨询/技术支持

专业胶粘剂研发生产

联络人:林先生 18925770398