H600-X排线UV胶 焊点保护电子粘接 护栏管PVC线材粘接光固化紫外线胶水 高强度

一、产品说明：H600-X 是一种单组份紫外线固化胶，适用于大部分材料之粘接，如各类塑胶、玻璃、金属、陶瓷；对PC、PMMA、ABS、PVC、PP等难粘材料具有极佳之粘附力。推荐用于各类排线补强粘接、PVC软材固定及电路线材固定等。本品具有较好之抗流挂特性，常温储存稳定，固化速度快，固化物表面光亮不粘，固化胶膜柔软，抗冲击性强，抗湿热及化学品优良，透明性好，优越的电气特性，绝缘防水防潮防尘等。

二、化学物质类型        改性丙烯酸酯      

外观                          淡黄色透明半流体

粘度(mPa.s/25℃)    5000-8000         

密度25℃ g/cm³      1.08

三、固化性能：H600-X在空气环境下需要足够的紫外能量辐射才能够固化。固化速率和固化效果需要足够的光能量，主要是200-400、nm紫外光，推荐使用365nm紫外光源。

四、固化条件:

500-1000W高压汞灯,主要波长365nm；固化条件 500-600mj/cm²

定位：3-5秒，固化30秒（具体固化依所使用的光源、胶膜厚度及被粘材料测试为准）

五、固化物性能：

热膨胀系数@ 25°C, /°C      1.5 x 10_6          

硬度（邵D）                    45-55

吸水率24 hrs @ 25°C, %      0.3    

玻璃化温度°C                    -10

断裂伸长率  %                   180  

介电强度 KV/MM             16

表面电阻    Ω                   2.5x 10_14 

 体积电阻 Ω.cm               5.5x 10_14

1、 Product Description: h600-x is a one component UV curing adhesive, which is suitable for most materials, such as all kinds of plastic, glass, metal, ceramics; it has excellent adhesion to PC, PMMA, ABS, PVC, PP and other difficult to stick materials. It is recommended to be used for reinforcing and bonding of all kinds of wires, fixing of PVC soft material, fixing of circuit wires, etc. This product has good anti sagging characteristics, stable storage at room temperature, fast curing speed, bright and non stick surface of the solidified product, soft curing adhesive film, strong impact resistance, excellent resistance to damp heat and chemicals, good transparency, superior electrical characteristics, insulation, waterproof, moisture-proof and dust-proof, etc.

2、 Chemical type modified acrylate

Light yellow transparent semi fluid

Viscosity (MPa. S / 25 ℃) 5000-8000

Density 25 ℃ g / cm 3 1.08

3、 Curing performance: h600-x needs enough UV energy radiation to cure in the air environment. The curing rate and the curing effect need enough light energy, mainly 200-400 nm UV light, 365nm UV light is recommended.

4、 Curing conditions:

500-1000w high pressure mercury lamp, main wavelength: 365nm; curing condition: 500-600mj / cm

Positioning: 3-5 seconds, curing for 30 seconds (the specific curing shall be subject to the test of light source, film thickness and glued material used)

5、 Properties of solidified products:

Coefficient of thermal expansion @ 25 ° C, / ° C 1.5 x 10 μ 6

Hardness (Shao d) 45-55

Water absorption 24 hrs @ 25 ° C,% 0.3

Glass transition temperature ° C-10

Elongation at break% 180

Dielectric strength kV / mm 16

Surface resistance Ω 2.5x 10_ Fourteen

Volume resistance Ω. Cm 5.5x 10_ Fourteen