808AB-X1蓄电池灌封胶 极柱胶红黑胶 环氧树脂绝缘胶密封胶灌封料 防水绝缘

808A/B-X1系两剂型环氧树脂绝缘材料，主要应用于铅酸免维护蓄电池正、负极柱的灌注/密封及其它类似产品（电子元器件、灯饰等）之粘接灌封/密封，保护绝缘、防潮封填等；混合后粘度低、且具有适当的可操作时间，易于生产作业；固化后粘接力佳，耐热、耐化学品性能优、耐酸性优；防潮防水防油防尘性能佳，耐湿热和大气老化等；固化物具有良好的绝缘、抗压、粘接强度；具有优良的电气特性与物性。
物性：
                     主剂808AX-1 
外       观      黑色/红色液体 
比       重       1．15±0.05 
粘度（25℃） 2500-5000cps 
贮 存 期 限        6个月 

                       固化剂808BX-1
外       观          褐色液体
比       重         1.05±0.05
粘度（25℃）  70-150cps
贮 存 期 限        6个月   
配      比：      A ：B = 2  ：1 （重量比）
可使用时间：      25℃×30-40分钟（100g混合量）
固化  条件：      常温6-8小时或80℃×1小时完全固化，初固2-3小时
固化物特性：
耐电压              Kv/mm            16-18         
热变形温度       ℃                    80
硬度                 shore  D           85          
绝缘电阻           Ω-cm              1.0×1015

808a / b-x1 is a kind of two dosage epoxy resin insulation material, which is mainly used in the filling / sealing of positive and negative pole of lead-acid maintenance free battery and the bonding / sealing of other similar products (electronic components, lighting, etc.), protection of insulation, moisture-proof sealing, etc.; after mixing, it has low viscosity, proper operation time, and is easy for production and operation; after curing, it has good adhesion, heat resistance and chemical resistance The products have excellent performance, acid resistance, moisture-proof, water-proof, oil-proof, dust-proof, heat and humidity resistance, air aging resistance, etc.; the solidified products have good insulation, compression resistance, bonding strength, and excellent electrical properties and physical properties.